AbstractShape

Simple widget capable of drawing a abstractShape. The abstractShape can be scaled and rotated around 0,0. The shapes points (corners) are calculated with regards to scaling and rotation to allow for faster redrawing. Care must be taken to call updateAbstractShapeCache() after updating the shape, the scale of the shape or the rotation of the shape.

Inherits from: CanvasWidget, Widget, Drawable

Inherited by: Shape< POINTS >

Public Classes

struct	ShapePoint
	Defines an alias for a single point.

Public Functions

	AbstractShape()
virtual bool	drawCanvasWidget(const Rect & invalidatedArea) const
	Draw canvas widget for the given invalidated area.
int	getAngle() const
	Gets the current angle in degrees of the abstractShape.
template <typename T > void	getAngle(T & angle)
	Gets the abstractShape's angle in degrees.
virtual CWRUtil::Q5	getCornerX(int i) const =0
	Gets the x coordinate of a corner (a point) of the shape.
virtual CWRUtil::Q5	getCornerY(int i) const =0
	Gets the y coordinate of a corner (a point) of the shape.
virtual int	getNumPoints() const =0
	Gets number of points used to make up the shape.
template <typename T > void	getOrigin(T & xOrigin, T & yOrigin) const
	Gets the position of the shapes (0,0).
template <typename T > void	getScale(T & x, T & y) const
	Gets the x scale and y scale of the shape as previously set using setScale.
template <typename T > void	moveOrigin(T x, T y)
	Sets the position of the shape's (0,0) in the widget.
template <typename T > void	setAngle(T angle)
	Sets the absolute angle in degrees to turn the AbstractShape.
virtual void	setCorner(int i, CWRUtil::Q5 x, CWRUtil::Q5 y) =0
	Sets one of the points (a corner) of the shape in CWRUtil::Q5 format.
template <typename T > void	setOrigin(T x, T y)
	Sets the position of the shape's (0,0) in the widget.
template <typename T > void	setScale(T newXScale, T newYScale)
	Scale the AbstractShape the given amounts in the x direction and the y direction.
template <typename T > void	setScale(T scale)
	Scale the AbstractShape the given amount in the x direction and the y direction.
template <typename T > void	setShape(const ShapePoint< T > * points)
	Sets a shape the struct Points.
template <typename T > void	setShape(ShapePoint< T > * points)
	Sets a shape the struct Points.
void	updateAbstractShapeCache()
	Updates the AbstractShape cache.
template <typename T > void	updateAngle(T angle)
	Sets the absolute angle in degrees to turn the AbstractShape.
template <typename T > void	updateScale(T newXScale, T newYScale)
	Scale the AbstractShape the given amount in the x direction and the y direction.

Protected Functions

virtual CWRUtil::Q5	getCacheX(int i) const =0
	Gets cached x coordinate of a point/corner.
virtual CWRUtil::Q5	getCacheY(int i) const =0
	Gets cached y coordinate of a point/corner.
virtual Rect	getMinimalRect() const
	Gets minimal rectangle containing the shape drawn by this widget.
virtual void	setCache(int i, CWRUtil::Q5 x, CWRUtil::Q5 y) =0
	Sets the cached coordinates of a given point/corner.

Additional inherited members

Public Functions inherited from CanvasWidget

	CanvasWidget()
virtual void	draw(const Rect & invalidatedArea) const
	Draws the given invalidated area.
virtual uint8_t	getAlpha() const
	Gets the current alpha value of the widget.
const AbstractPainter *	getPainter() const
	Gets the current painter for the CanvasWidget.
virtual Rect	getSolidRect() const
	Gets the largest solid (non-transparent) rectangle.
virtual void	invalidate() const
	Invalidates the area covered by this CanvasWidget.
virtual void	setAlpha(uint8_t newAlpha)
	Sets the opacity (alpha value).
void	setPainter(const AbstractPainter & painter)
	Sets a painter for the CanvasWidget.

Protected Attributes inherited from CanvasWidget

uint8_t	alpha
	The Alpha for this CanvasWidget.

Public Functions inherited from Widget

virtual void	getLastChild(int16_t , int16_t , Drawable ** last)
	Since a Widget is only one Drawable, Widget::getLastChild simply yields itself as result, but only if the Widget isVisible and isTouchable.

Public Functions inherited from Drawable

void	center()
	Centers the Drawable inside its parent.
void	centerX()
	Center the Drawable horizontally inside its parent.
void	centerY()
	Center the Drawable vertically inside its parent.
virtual void	childGeometryChanged()
	This function can be called on parent nodes to signal that the size or position of one or more of its children has changed.
virtual void	draw(const Rect & invalidatedArea) const =0
	Draw this drawable.
	Drawable()
	Initializes a new instance of the Drawable class.
void	drawToDynamicBitmap(BitmapId id)
	Render the Drawable object into a dynamic bitmap.
void	expand(int margin =0)
	Expands the Drawable to have the same size as its parent with a given margin around the edge.
Rect	getAbsoluteRect() const
	Helper function for obtaining the rectangle this Drawable covers, expressed in absolute coordinates.
virtual Drawable *	getFirstChild()
	Function for obtaining the first child of this drawable if any.
int16_t	getHeight() const
	Gets the height of this Drawable.
virtual void	getLastChild(int16_t x, int16_t y, Drawable ** last) =0
	Function for obtaining the the last child of this drawable that intersects with the specified point.
Drawable *	getNextSibling()
	Gets the next sibling node.
Drawable *	getParent() const
	Returns the parent node.
const Rect &	getRect() const
	Gets the rectangle this Drawable covers, in coordinates relative to its parent.
virtual Rect	getSolidRect() const =0
	Get (the largest possible) rectangle that is guaranteed to be solid (opaque).
virtual Rect	getSolidRectAbsolute()
	Helper function for obtaining the largest solid rect (as implemented by getSolidRect()) expressed in absolute coordinates.
virtual void	getVisibleRect(Rect & rect) const
	Function for finding the visible part of this drawable.
int16_t	getWidth() const
	Gets the width of this Drawable.
int16_t	getX() const
	Gets the x coordinate of this Drawable, relative to its parent.
int16_t	getY() const
	Gets the y coordinate of this Drawable, relative to its parent.
virtual void	handleClickEvent(const ClickEvent & event)
	Defines the event handler interface for ClickEvents.
virtual void	handleDragEvent(const DragEvent & event)
	Defines the event handler interface for DragEvents.
virtual void	handleGestureEvent(const GestureEvent & event)
	Defines the event handler interface for GestureEvents.
virtual void	handleTickEvent()
	Called periodically by the framework if the Drawable instance has subscribed to timer ticks.
virtual void	invalidate() const
	Tell the framework that this entire Drawable needs to be redrawn.
virtual void	invalidateContent() const
	Tell the framework that the contents of the Drawable needs to be redrawn.
virtual void	invalidateRect(Rect & invalidatedArea) const
	Request that a region of this drawable is redrawn.
bool	isTouchable() const
	Gets whether this Drawable receives touch events or not.
bool	isVisible() const
	Gets whether this Drawable is visible.
virtual void	moveRelative(int16_t x, int16_t y)
	Moves the drawable.
virtual void	moveTo(int16_t x, int16_t y)
	Moves the drawable.
virtual void	setHeight(int16_t height)
	Sets the height of this drawable.
void	setPosition(const Drawable & drawable)
	Sets the position of the Drawable to the same as the given Drawable.
void	setPosition(int16_t x, int16_t y, int16_t width, int16_t height)
	Sets the size and position of this Drawable, relative to its parent.
void	setTouchable(bool touch)
	Controls whether this Drawable receives touch events or not.
void	setVisible(bool vis)
	Controls whether this Drawable should be visible.
virtual void	setWidth(int16_t width)
	Sets the width of this drawable.
void	setWidthHeight(const Bitmap & bitmap)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(const Drawable & drawable)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(const Rect & other)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(int16_t width, int16_t height)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
virtual void	setX(int16_t x)
	Sets the x coordinate of this Drawable, relative to its parent.
void	setXY(const Drawable & drawable)
	Sets the x and y coordinates of this Drawable.
void	setXY(int16_t x, int16_t y)
	Sets the x and y coordinates of this Drawable, relative to its parent.
virtual void	setY(int16_t y)
	Sets the y coordinate of this Drawable, relative to its parent.
virtual void	translateRectToAbsolute(Rect & r) const
	Helper function for converting a region of this Drawable to absolute coordinates.
virtual	~Drawable()
	Finalizes an instance of the Drawable class.

Protected Attributes inherited from Drawable

Drawable *	nextSibling
	Pointer to the next Drawable.
Drawable *	parent
	Pointer to this drawable's parent.
Rect	rect
	The coordinates of this Drawable, relative to its parent.
bool	touchable
	True if this drawable should receive touch events.
bool	visible
	True if this drawable should be drawn.

Public Functions Documentation

AbstractShape

AbstractShape	(			)

drawCanvasWidget

virtual bool drawCanvasWidget	(	const Rect &	invalidatedArea	)

Draw canvas widget for the given invalidated area.

Similar to draw(), but might be invoked several times with increasingly smaller areas to due to memory constraints from the underlying CanvasWidgetRenderer.

Parameters:

invalidatedArea	The invalidated area.

Returns:

true if the widget was drawn properly, false if not.

See also:

draw

Reimplements: touchgfx::CanvasWidget::drawCanvasWidget

getAngle

int getAngle	(			)	const

Gets the current angle in degrees of the abstractShape.

Returns:

The angle of the AbstractShaperounded down to the precision of int.

Note

Angles are given in degrees, so a full circle is 360.

getAngle

void getAngle	(	T &	angle	)

Gets the abstractShape's angle in degrees.

Template Parameters:

T	Generic type parameter.

Parameters:

angle	The current AbstractShape rotation angle rounded down to the precision of T.

Note

Angles are given in degrees, so a full circle is 360.

getCornerX

virtual CWRUtil::Q5 getCornerX	(	int	i	)

Gets the x coordinate of a corner (a point) of the shape.

Parameters:

i	Zero-based index of the corner.

Returns:

The corner x coordinate in CWRUtil::Q5 format.

Reimplemented by: touchgfx::Shape::getCornerX

getCornerY

virtual CWRUtil::Q5 getCornerY	(	int	i	)

Gets the y coordinate of a corner (a point) of the shape.

Parameters:

i	Zero-based index of the corner.

Returns:

The corner y coordinate in CWRUtil::Q5 format.

Reimplemented by: touchgfx::Shape::getCornerY

getNumPoints

virtual int getNumPoints	(			)	const =0

Gets number of points used to make up the shape.

Returns:

The number of points.

Reimplemented by: touchgfx::Shape::getNumPoints

getOrigin

void getOrigin	(	T &	xOrigin ,		const
		T &	yOrigin		const
		)	const

Gets the position of the shapes (0,0).

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

xOrigin	The x coordinate rounded down to the precision of T.
yOrigin	The y coordinate rounded down to the precision of T.

getScale

void getScale	(	T &	x ,		const
		T &	y		const
		)	const

Gets the x scale and y scale of the shape as previously set using setScale.

Default is 1 for both x scale and y scale.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

x	Scaling of x coordinates rounded down to the precision of T.
y	Scaling of y coordinates rounded down to the precision of T.

See also:

setScale

moveOrigin

void moveOrigin	(	T	x ,
		T	y
		)

Sets the position of the shape's (0,0) in the widget.

This means that all coordinates initially used when created the shape are moved relative to these given offsets. Subsequent calls to moveOrigin() or setOrigin() will replace the old values for origin. The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

x	The absolute x coordinate of the shapes position (0,0).
y	The absolute y coordinate of the shapes position (0,0).

Note

The area containing the AbstractShape is invalidated before and after the change.

See also:

setOrigin

setAngle

void setAngle	(	T	angle	)

Sets the absolute angle in degrees to turn the AbstractShape.

0 degrees means no rotation and 90 degrees is rotate the shape clockwise. Repeated calls to setAngle(10) will therefore not rotate the shape by an additional 10 degrees. The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter.

Parameters:

angle	The absolute angle to turn the abstractShape to relative to 0 (straight up).

Note

The area containing the AbstractShape is not invalidated. Angles are given in degrees, so a full circle is 360.

See also:

updateAngle

setCorner

virtual void setCorner	(	int	i ,		=0
		CWRUtil::Q5	x ,		=0
		CWRUtil::Q5	y		=0
		)	=0

Sets one of the points (a corner) of the shape in CWRUtil::Q5 format.

Parameters:

i	Zero-based index of the corner.
x	The x coordinate in CWRUtil::Q5 format.
y	The y coordinate in CWRUtil::Q5 format.

Note

Remember to call updateAbstractShapeCache() after calling setCorner one or more times, to make sure that the cached outline of the shape is correct.

See also:

updateAbstractShapeCache

Reimplemented by: touchgfx::Shape::setCorner

setOrigin

void setOrigin	(	T	x ,
		T	y
		)

Sets the position of the shape's (0,0) in the widget.

This means that all coordinates initially used when created the shape are moved relative to these given offsets. Subsequent calls to setOrigin() or moveOrigin() will replace the old values for origin. The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

x	The absolute x coordinate of the shapes position (0,0).
y	The absolute y coordinate of the shapes position (0,0).

Note

The area containing the AbstractShape is not invalidated.

See also:

moveOrigin

setScale

void setScale	(	T	newXScale ,
		T	newYScale
		)

Scale the AbstractShape the given amounts in the x direction and the y direction.

The new scaling factors do not multiply to previously set scaling factors, so scaling by 2 and later scaling by 2 again will not scale by 4, only by 2. The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

newXScale	The new scale in the x direction.
newYScale	The new scale in the y direction.

Note

The area containing the AbstractShape is not invalidated.

See also:

getScale, updateScale

setScale

void setScale	(	T	scale	)

Scale the AbstractShape the given amount in the x direction and the y direction.

The new scaling factors do not multiply to previously set scaling factors, so scaling by 2 and later scaling by 2 again will not scale by 4, only by 2. The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

scale	The scale in the x direction.

Note

The area containing the AbstractShape is not invalidated.

See also:

getScale

setShape

void setShape	(	const ShapePoint< T > *	points	)

Sets a shape the struct Points.

The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

points	The points that make up the shape. The pointer must point to an array of getNumPoints() elements of type ShapePoint.

Note

The area containing the shape is not invalidated.

setShape

void setShape	(	ShapePoint< T > *	points	)

Sets a shape the struct Points.

The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

points	The points that make up the shape. The pointer must point to an array of getNumPoints() elements of type ShapePoint.

Note

The area containing the shape is not invalidated.

updateAbstractShapeCache

void updateAbstractShapeCache	(			)

Updates the AbstractShape cache.

The cache is used to be able to quickly redraw the AbstractShape without calculating the points that make up the abstractShape (with regards to scaling and rotation).

updateAngle

void updateAngle	(	T	angle	)

Sets the absolute angle in degrees to turn the AbstractShape.

0 degrees means no rotation and 90 degrees is rotate the shape clockwise. Repeated calls to setAngle(10) will therefore not rotate the shape by an additional 10 degrees. The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter.

Parameters:

angle	The angle to turn the abstractShape.

Note

The area containing the AbstractShape is invalidated before and after the change. Angles are given in degrees, so a full circle is 360.

See also:

setAngle

updateScale

void updateScale	(	T	newXScale ,
		T	newYScale
		)

Scale the AbstractShape the given amount in the x direction and the y direction.

The new scaling factors do not multiply to previously set scaling factors, so scaling by 2 and later scaling by 2 again will not scale by 4, only by 2. The cached outline of the shape is automatically updated.

Template Parameters:

T	Generic type parameter, either int or float.

Parameters:

newXScale	The new scale in the x direction.
newYScale	The new scale in the y direction.

Note

The area containing the AbstractShape is invalidated before and after the change.

See also:

setScale

Protected Functions Documentation

getCacheX

virtual CWRUtil::Q5 getCacheX	(	int	i	)

Gets cached x coordinate of a point/corner.

Parameters:

i	Zero-based index of the point/corner.

Returns:

The cached x coordinate, or zero if nothing is cached for the given i.

Reimplemented by: touchgfx::Shape::getCacheX

getCacheY

virtual CWRUtil::Q5 getCacheY	(	int	i	)

Gets cached y coordinate of a point/corner.

Parameters:

i	Zero-based index of the point/corner.

Returns:

The cached y coordinate, or zero if nothing is cached for the given i.

Reimplemented by: touchgfx::Shape::getCacheY

getMinimalRect

virtual Rect getMinimalRect	(			)	const

Gets minimal rectangle containing the shape drawn by this widget.

Default implementation returns the size of the entire widget, but this function should be overwritten in subclasses and return the minimal rectangle containing the shape. See classes such as Circle for example implementations.

Returns:

The minimal rectangle containing the shape drawn.

Reimplements: touchgfx::CanvasWidget::getMinimalRect

setCache

virtual void setCache	(	int	i ,		=0
		CWRUtil::Q5	x ,		=0
		CWRUtil::Q5	y		=0
		)	=0

Sets the cached coordinates of a given point/corner.

The coordinates in the cache are the coordinates from the corners after rotation and scaling has been applied to the coordinate.

Parameters:

i	Zero-based index of the corner.
x	The x coordinate.
y	The y coordinate.

Reimplemented by: touchgfx::Shape::setCache