Gauge

A gauge is a graphical element that shows a needle on a dial, often a speedometer or similar. Much like a progress indicator, the minimum and maximum value of the Gauge, as well as steps can be set. For more information on this, consult the documentation on ProgressIndicators.

A Gauge has a needle and optionally an arc that follows the needle.

Inherits from: AbstractProgressIndicator, Container, Drawable

Public Functions

	Gauge()
	Initializes a new instance of the Gauge class.
Circle &	getArc()
	Gets a reference to the arc (Circle).
virtual void	getCenter(int & x, int & y) const
	Gets the texture mapper center coordinates.
virtual int	getEndAngle() const
	Gets end angle.
virtual int	getStartAngle() const
	Gets start angle for the needle (and arc).
void	putArcOnTop(bool arcOnTop =true)
	Shows the arc on top of the needle.
virtual void	setAlpha(uint8_t newAlpha)
	Sets the opacity (alpha value).
void	setArcPosition(int16_t x, int16_t y, int16_t width, int16_t height)
	Sets arc position inside the Gauge.
void	setArcVisible(bool show =true)
	Allow the arc to be shown or hidden.
void	setBackgroundOffset(int16_t offsetX, int16_t offsetY)
	Sets background offset inside the Gauge.
virtual void	setCenter(int x, int y)
	Sets the center of the texture mapper and the arc inside the Gauge.
virtual void	setHeight(int16_t height)
	Sets the height of this drawable.
void	setMovingNeedleRenderingAlgorithm(TextureMapper::RenderingAlgorithm algorithm)
	Sets rendering algorithm used when the needle is moving during an animation.
void	setNeedle(const BitmapId bitmapId, int16_t rotationCenterX, int16_t rotationCenterY)
	Sets a bitmap for the needle and the rotation point in the needle bitmap.
virtual void	setStartEndAngle(int startAngle, int endAngle)
	Sets start and end angle for the needle and arc.
void	setSteadyNeedleRenderingAlgorithm(TextureMapper::RenderingAlgorithm algorithm)
	Sets rendering algorithm used when the needle is steady (after an animation).
virtual void	setValue(int value)
	Sets the current value in the range (min..max) set by setRange().
virtual void	setWidth(int16_t width)
	Sets the width of this drawable.

Protected Functions

virtual void	setProgressIndicatorPosition(int16_t x, int16_t y, int16_t width, int16_t height)
	This function has no effect on a Gauge.
void	setupNeedleTextureMapper()
	Sets up the needle texture mapper.

Protected Attributes

TextureMapper::RenderingAlgorithm	algorithmMoving
	The algorithm used when the needle is moving.
TextureMapper::RenderingAlgorithm	algorithmSteady
	The algorithm used when the needle is steady.
Circle	arc
	The arc.
int16_t	gaugeCenterX
	The x coordinate of the rotation point of the hands.
int16_t	gaugeCenterY
	The y coordinate of the rotation point of the hands.
TextureMapper	needle
	The textureMapper.
int16_t	needleCenterX
	The x coordinate of the rotation point of the hands.
int16_t	needleCenterY
	The y coordinate of the rotation point of the hands.
int	needleEndAngle
	The end angle.
int	needleStartAngle
	The start angle.

Additional inherited members

Public Functions inherited from AbstractProgressIndicator

	AbstractProgressIndicator()
	Initializes a new instance of the AbstractProgressIndicator class with a default range 0-100.
virtual uint8_t	getAlpha() const
	Gets the current alpha value of the widget.
virtual uint16_t	getProgress(uint16_t range =100) const
	Gets the current progress based on the range set by setRange() and the value set by setValue().
virtual int16_t	getProgressIndicatorHeight() const
	Gets progress indicator height.
virtual int16_t	getProgressIndicatorWidth() const
	Gets progress indicator width.
virtual int16_t	getProgressIndicatorX() const
	Gets progress indicator x coordinate.
virtual int16_t	getProgressIndicatorY() const
	Gets progress indicator y coordinate.
virtual void	getRange(int & min, int & max) const
	Gets the range set by setRange().
virtual void	getRange(int & min, int & max, uint16_t & steps) const
	Gets the range set by setRange().
virtual void	getRange(int & min, int & max, uint16_t & steps, uint16_t & minStep) const
	Gets the range set by setRange().
virtual int	getValue() const
	Gets the current value set by setValue().
virtual void	handleTickEvent()
	Called periodically by the framework if the Drawable instance has subscribed to timer ticks.
virtual void	setBackground(const Bitmap & bitmapBackground)
	Sets the background image.
virtual void	setEasingEquation(EasingEquation easingEquation)
	Sets easing equation to be used in updateValue.
virtual void	setRange(int min, int max, uint16_t steps =0, uint16_t minStep =0)
	Sets the range for the progress indicator.
void	setValueSetAction(GenericCallback< const AbstractProgressIndicator & > & callback)
	Sets callback that will be triggered every time a new value is assigned to the progress indicator.
void	setValueUpdatedAction(GenericCallback< const AbstractProgressIndicator & > & callback)
	Sets callback that will be triggered when updateValue has finished animating to the final value.
virtual void	updateValue(int value, uint16_t duration)
	Update the current value in the range (min..max) set by setRange().

Protected Attributes inherited from AbstractProgressIndicator

int	animationDuration
	Duration of the animation.
int	animationEndValue
	The animation end value.
bool	animationRunning
	Is the animation running.
int	animationStartValue
	The animation start value.
int	animationStep
	The current animation step.
Image	background
	The background image.
int	currentValue
	The current value.
EasingEquation	equation
	The equation used in updateValue()
Container	progressIndicatorContainer
	The container that holds the actual progress indicator.
int	rangeMax
	The range maximum.
int	rangeMin
	The range minimum.
uint16_t	rangeSteps
	The range steps.
uint16_t	rangeStepsMin
	The range steps minimum.
GenericCallback< const AbstractProgressIndicator & > *	valueSetCallback
	New value assigned Callback.
GenericCallback< const AbstractProgressIndicator & > *	valueUpdatedCallback
	Animation ended Callback.

Public Functions inherited from Container

virtual void	add(Drawable & d)
	Adds a Drawable instance as child to this Container.
	Container()
virtual bool	contains(const Drawable & d)
	Query if a given Drawable has been added directly to this Container.
virtual void	draw(const Rect & invalidatedArea) const
	Draw this drawable.
virtual void	forEachChild(GenericCallback< Drawable & > * function)
	Executes the specified callback function for each child in the Container.
virtual Drawable *	getFirstChild()
	Obtain a pointer to the first child of this container.
virtual void	getLastChild(int16_t x, int16_t y, Drawable ** last)
	Gets the last child in the list of children in this Container.
virtual void	getLastChildNear(int16_t x, int16_t y, Drawable * last, int16_t fingerAdjustmentX, int16_t * fingerAdjustmentY)
	Works similar to getLastChild() but also considers the current set finger size in HAL.
virtual Rect	getSolidRect() const
	Get (the largest possible) rectangle that is guaranteed to be solid (opaque).
virtual void	insert(Drawable * previous, Drawable & d)
	Inserts a Drawable after a specific child node.
virtual void	remove(Drawable & d)
	Removes a Drawable from the container by removing it from the linked list of children.
virtual void	removeAll()
	Removes all children in the Container by resetting their parent and sibling pointers.
virtual void	unlink()
	Removes all children by unlinking the first child.

Protected Functions inherited from Container

virtual Rect	getContainedArea() const
	Gets a rectangle describing the total area covered by the children of this container.
virtual void	moveChildrenRelative(int16_t deltaX, int16_t deltaY)
	Calls moveRelative on all children.

Protected Attributes inherited from Container

Drawable *	firstChild
	Pointer to the first child of this container. Subsequent children can be found through firstChild's nextSibling.

Public Functions inherited from Drawable

void	center()
	Centers the Drawable inside its parent.
void	centerX()
	Center the Drawable horizontally inside its parent.
void	centerY()
	Center the Drawable vertically inside its parent.
virtual void	childGeometryChanged()
	This function can be called on parent nodes to signal that the size or position of one or more of its children has changed.
virtual void	draw(const Rect & invalidatedArea) const =0
	Draw this drawable.
	Drawable()
	Initializes a new instance of the Drawable class.
void	drawToDynamicBitmap(BitmapId id)
	Render the Drawable object into a dynamic bitmap.
void	expand(int margin =0)
	Expands the Drawable to have the same size as its parent with a given margin around the edge.
Rect	getAbsoluteRect() const
	Helper function for obtaining the rectangle this Drawable covers, expressed in absolute coordinates.
virtual Drawable *	getFirstChild()
	Function for obtaining the first child of this drawable if any.
int16_t	getHeight() const
	Gets the height of this Drawable.
virtual void	getLastChild(int16_t x, int16_t y, Drawable ** last) =0
	Function for obtaining the the last child of this drawable that intersects with the specified point.
Drawable *	getNextSibling()
	Gets the next sibling node.
Drawable *	getParent() const
	Returns the parent node.
const Rect &	getRect() const
	Gets the rectangle this Drawable covers, in coordinates relative to its parent.
virtual Rect	getSolidRect() const =0
	Get (the largest possible) rectangle that is guaranteed to be solid (opaque).
virtual Rect	getSolidRectAbsolute()
	Helper function for obtaining the largest solid rect (as implemented by getSolidRect()) expressed in absolute coordinates.
virtual void	getVisibleRect(Rect & rect) const
	Function for finding the visible part of this drawable.
int16_t	getWidth() const
	Gets the width of this Drawable.
int16_t	getX() const
	Gets the x coordinate of this Drawable, relative to its parent.
int16_t	getY() const
	Gets the y coordinate of this Drawable, relative to its parent.
virtual void	handleClickEvent(const ClickEvent & event)
	Defines the event handler interface for ClickEvents.
virtual void	handleDragEvent(const DragEvent & event)
	Defines the event handler interface for DragEvents.
virtual void	handleGestureEvent(const GestureEvent & event)
	Defines the event handler interface for GestureEvents.
virtual void	handleTickEvent()
	Called periodically by the framework if the Drawable instance has subscribed to timer ticks.
virtual void	invalidate() const
	Tell the framework that this entire Drawable needs to be redrawn.
virtual void	invalidateRect(Rect & invalidatedArea) const
	Request that a region of this drawable is redrawn.
bool	isTouchable() const
	Gets whether this Drawable receives touch events or not.
bool	isVisible() const
	Gets whether this Drawable is visible.
virtual void	moveRelative(int16_t x, int16_t y)
	Moves the drawable.
virtual void	moveTo(int16_t x, int16_t y)
	Moves the drawable.
void	setPosition(const Drawable & drawable)
	Sets the position of the Drawable to the same as the given Drawable.
void	setPosition(int16_t x, int16_t y, int16_t width, int16_t height)
	Sets the size and position of this Drawable, relative to its parent.
void	setTouchable(bool touch)
	Controls whether this Drawable receives touch events or not.
void	setVisible(bool vis)
	Controls whether this Drawable should be visible.
void	setWidthHeight(const Bitmap & bitmap)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(const Drawable & drawable)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(const Rect & rect)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(int16_t width, int16_t height)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
virtual void	setX(int16_t x)
	Sets the x coordinate of this Drawable, relative to its parent.
void	setXY(const Drawable & drawable)
	Sets the x and y coordinates of this Drawable.
void	setXY(int16_t x, int16_t y)
	Sets the x and y coordinates of this Drawable, relative to its parent.
virtual void	setY(int16_t y)
	Sets the y coordinate of this Drawable, relative to its parent.
virtual void	translateRectToAbsolute(Rect & r) const
	Helper function for converting a region of this Drawable to absolute coordinates.
virtual	~Drawable()
	Finalizes an instance of the Drawable class.

Protected Attributes inherited from Drawable

Drawable *	nextSibling
	Pointer to the next Drawable.
Drawable *	parent
	Pointer to this drawable's parent.
Rect	rect
	The coordinates of this Drawable, relative to its parent.
bool	touchable
	True if this drawable should receive touch events.
bool	visible
	True if this drawable should be drawn.

Public Functions Documentation

Gauge

Gauge	(			)

Initializes a new instance of the Gauge class.

getArc

Circle & getArc	(			)

Gets a reference to the arc (Circle).

This allows for setting radius, line width, painter, etc. on the arc (Circle).

Returns:

The arc (Circle).

getCenter

virtual void getCenter	(	int &	x ,		const
		int &	y		const
		)	const

Gets the texture mapper center coordinates.

Parameters:

x	The x coordinate of the center of the texture mapper.
y	The y coordinate of the center of the texture mapper.

See also:

setCenter

getEndAngle

virtual int getEndAngle	(			)	const

Gets end angle.

Beware that the value returned is not related to the current progress of the texture mapper but rather the end point of the Gauge when it is at max value.

Returns:

The end angle.

See also:

setStartEndAngle

getStartAngle

virtual int getStartAngle	(			)	const

Gets start angle for the needle (and arc).

Returns:

The start angle.

See also:

setStartEndAngle, getEndAngle

putArcOnTop

void putArcOnTop	(	bool	arcOnTop =true	)

Shows the arc on top of the needle.

By default the needle is drawn on top of the arc.

Parameters:

arcOnTop	(Optional) True to put the arc on top of the needle (default), false to put the needle on top of the arc.

setAlpha

virtual void setAlpha	(	uint8_t	newAlpha	)

Sets the opacity (alpha value).

This can be used to fade it away by gradually decreasing the alpha value from 255 (solid) to 0 (invisible).

Parameters:

newAlpha	The new alpha value. 255=solid, 0=invisible.

Note

The user code must call invalidate() in order to update the display.

See also:

getAlpha

Reimplements: touchgfx::AbstractProgressIndicator::setAlpha

setArcPosition

void setArcPosition	(	int16_t	x ,
		int16_t	y ,
		int16_t	width ,
		int16_t	height
		)

Sets arc position inside the Gauge.

This is especially useful if the arc is using a bitmap painter. If the center has previously been set, the arc center will be updated to be at the same offset relative to the top left corner of the Gauge.

Parameters:

x	The x coordinate.
y	The y coordinate.
width	The width.
height	The height.

See also:

setCenter, getArc

setArcVisible

void setArcVisible	(	bool	show =true	)

Allow the arc to be shown or hidden.

Parameters:

show	(Optional) True to show, false to hide. Default is to show the arc.

setBackgroundOffset

void setBackgroundOffset	(	int16_t	offsetX ,
		int16_t	offsetY
		)

Sets background offset inside the Gauge.

If the dial is smaller than the size needed for the Gauge to show the needle, the background image can be moved inside the Gauge.

Parameters:

offsetX	The offset x coordinate.
offsetY	The offset y coordinate.

See also:

setBackground

setCenter

virtual void setCenter	(	int	x ,
		int	y
		)

Sets the center of the texture mapper and the arc inside the Gauge.

Parameters:

x	The x coordinate of the center of the texture mapper.
y	The y coordinate of the center of the texture mapper.

See also:

getCenter

setHeight

virtual void setHeight	(	int16_t	height	)

Sets the height of this drawable.

Parameters:

height	The new height.

Note

For most Drawable widgets, changing this does normally not automatically yield a redraw.

Reimplements: touchgfx::Drawable::setHeight

setMovingNeedleRenderingAlgorithm

void setMovingNeedleRenderingAlgorithm	(	TextureMapper::RenderingAlgorithm	algorithm	)

Sets rendering algorithm used when the needle is moving during an animation.

For better performance, this can be set to TextureMapper::NEAREST_NEIGHBOR. For nicer graphics, it should be set to TextureMapper::BILINEAR_INTERPOLATION (this is the default behavior).

Parameters:

algorithm	The algorithm.

See also:

updateValue, setSteadyNeedleRenderingAlgorithm

setNeedle

void setNeedle	(	const BitmapId	bitmapId ,
		int16_t	rotationCenterX ,
		int16_t	rotationCenterY
		)

Sets a bitmap for the needle and the rotation point in the needle bitmap.

Parameters:

bitmapId	Identifier for the bitmap.
rotationCenterX	The rotation center x coordinate.
rotationCenterY	The rotation center y coordinate.

setStartEndAngle

virtual void setStartEndAngle	(	int	startAngle ,
		int	endAngle
		)

Sets start and end angle for the needle and arc.

By swapping end and start angles, these can progress backwards.

Parameters:

startAngle	The start angle.
endAngle	The end angle.

setSteadyNeedleRenderingAlgorithm

void setSteadyNeedleRenderingAlgorithm	(	TextureMapper::RenderingAlgorithm	algorithm	)

Sets rendering algorithm used when the needle is steady (after an animation).

For better performance, this can be set to TextureMapper::NEAREST_NEIGHBOR. For nicer graphics, it should be set to TextureMapper::BILINEAR_INTERPOLATION (this is the default behavior).

Parameters:

algorithm	The algorithm.

See also:

updateValue, setMovingNeedleRenderingAlgorithm

setValue

virtual void setValue	(	int	value	)

Sets the current value in the range (min..max) set by setRange().

Values lower than min are mapped to min, values higher than max are mapped to max. If a callback function has been set using setValueSetAction, that callback will be called (unless the new value is the same as the current value).

Parameters:

value	The value.

Note

if value is equal to the current value, nothing happens, and the callback will not be called.

See also:

getValue, updateValue, setValueSetAction

Reimplements: touchgfx::AbstractProgressIndicator::setValue

setWidth

virtual void setWidth	(	int16_t	width	)

Sets the width of this drawable.

Parameters:

width	The new width.

Note

For most Drawable widgets, changing this does normally not automatically yield a redraw.

Reimplements: touchgfx::Drawable::setWidth

Protected Functions Documentation

setProgressIndicatorPosition

virtual void setProgressIndicatorPosition	(	int16_t	x ,
		int16_t	y ,
		int16_t	width ,
		int16_t	height
		)

This function has no effect on a Gauge.

Parameters:

x	unused
y	unused
width	unused
height	unused

Reimplements: touchgfx::AbstractProgressIndicator::setProgressIndicatorPosition

setupNeedleTextureMapper

void setupNeedleTextureMapper	(			)

Sets up the needle texture mapper.

Protected Attributes Documentation

algorithmMoving

TextureMapper::RenderingAlgorithm algorithmMoving

The algorithm used when the needle is moving.

algorithmSteady

TextureMapper::RenderingAlgorithm algorithmSteady

The algorithm used when the needle is steady.

arc

Circle arc

The arc.

gaugeCenterX

int16_t gaugeCenterX

The x coordinate of the rotation point of the hands.

gaugeCenterY

int16_t gaugeCenterY

The y coordinate of the rotation point of the hands.

needle

TextureMapper needle

The textureMapper.

needleCenterX

int16_t needleCenterX

The x coordinate of the rotation point of the hands.

needleCenterY

int16_t needleCenterY

The y coordinate of the rotation point of the hands.

needleEndAngle

int needleEndAngle

The end angle.

needleStartAngle

int needleStartAngle

The start angle.