ZoomAnimationImage

touchgfx/containers/ZoomAnimationImage.hpp

Class for optimizing and wrapping move and zoom operations on a ScalableImage. The ZoomAnimationImage takes two bitmaps representing the same image but at a small and a large resolution. These bitmaps should be the sizes that are used when not animating the image. The ZoomAnimationImage will use an Image for displaying the Bitmap when its width and height matches either of them. When it does not match the size of one of the bitmaps, it will use a ScalableImage instead. The main idea is that the supplied bitmaps should be the end points of the zoom animation so that it ends up using an Image when not animating. This is, however, not a requirement. You can animate from and to sizes that are not equal the sizes of the bitmaps. The result is a container that has the high performance of an ordinary image when the size matches the pre-rendered bitmaps. Moreover it supplies easy to use animation functions that lets you zoom and move the image.

Note: Since this container uses the ScalableImage it has the same restrictions as a ScaleableImage, i.e. 1bpp is not supported.

Inherits from: Container, Drawable

Public Types

enum	ZoomMode { FIXED_CENTER, FIXED_LEFT, FIXED_RIGHT, FIXED_TOP, FIXED_BOTTOM, FIXED_LEFT_AND_TOP, FIXED_RIGHT_AND_TOP, FIXED_LEFT_AND_BOTTOM, FIXED_RIGHT_AND_BOTTOM }
	A ZoomMode describes in which direction the image will grow/shrink when do a zoom animation.

Protected Types

enum	States { ANIMATE_ZOOM, ANIMATE_ZOOM_AND_MOVE, NO_ANIMATION }
	Animation states.

Public Functions

void	cancelZoomAnimation()
	Cancel zoom animation.
virtual uint8_t	getAlpha() const
	Gets the current alpha value of the widget.
virtual uint16_t	getAnimationDelay() const
	Gets the current animation delay.
Bitmap	getLargeBitmap() const
	Gets the large bitmap.
virtual ScalableImage::ScalingAlgorithm	getScalingMode()
	Gets the scaling algorithm of the ScalableImage.
Bitmap	getSmallBitmap() const
	Gets the small bitmap.
virtual void	handleTickEvent()
	Called periodically by the framework if the Drawable instance has subscribed to timer ticks.
virtual void	invalidateContent() const
	Tell the framework that the contents of the Drawable needs to be redrawn.
bool	isZoomAnimationRunning() const
	Is there currently an animation running.
virtual void	setAlpha(uint8_t newAlpha)
	Sets the opacity (alpha value).
virtual void	setAnimationDelay(uint16_t delay)
	Sets a delay on animations done by the ZoomAnimationImage.
void	setAnimationEndedCallback(GenericCallback< const ZoomAnimationImage & > & callback)
	Associates an action to be performed when the animation ends.
void	setBitmaps(const Bitmap & smallBitmap, const Bitmap & largeBitmap)
	Initializes the bitmap of the image to be used.
virtual void	setHeight(int16_t height)
	Sets the height of this drawable.
virtual void	setScalingMode(ScalableImage::ScalingAlgorithm mode)
	Sets the algorithm to be used.
virtual void	setWidth(int16_t width)
	Sets the width of this drawable.
void	startZoomAndMoveAnimation(int16_t endX, int16_t endY, int16_t endWidth, int16_t endHeight, uint16_t duration, ZoomMode zoomMode =FIXED_LEFT_AND_TOP, EasingEquation xProgressionEquation =&EasingEquations::linearEaseNone, EasingEquation yProgressionEquation =&EasingEquations::linearEaseNone, EasingEquation widthProgressionEquation =&EasingEquations::linearEaseNone, EasingEquation heightProgressionEquation =&EasingEquations::linearEaseNone)
	Setup and starts the zoom and move animation.
void	startZoomAnimation(int16_t endWidth, int16_t endHeight, uint16_t duration, ZoomMode zoomMode =FIXED_LEFT_AND_TOP, EasingEquation widthProgressionEquation =&EasingEquations::linearEaseNone, EasingEquation heightProgressionEquation =&EasingEquations::linearEaseNone)
	Setup and starts the zoom animation.
	ZoomAnimationImage()

Protected Functions

virtual void	setCurrentState(States state)
	Sets the current animation state and reset the animation counter.
void	startTimerAndSetParameters(int16_t endWidth, int16_t endHeight, uint16_t duration, ZoomMode zoomMode, EasingEquation widthProgressionEquation, EasingEquation heightProgressionEquation)
	Starts timer and set parameters.
virtual void	updateRenderingMethod()
	Chooses the optimal rendering of the image given the current width and height.
virtual void	updateZoomAnimationDeltaXY()
	Calculates the change in X and Y caused by the zoom animation given the current ZoomMode.

Protected Attributes

uint16_t	animationCounter
	The progress counter for the animation.
uint16_t	animationDuration
	Duration of the animation.
GenericCallback< const ZoomAnimationImage & > *	animationEndedAction
	The animation ended action.
States	currentState
	The current animation state.
ZoomMode	currentZoomMode
	The ZoomMode to use by the animation.
Image	image
	The image for displaying the bitmap when the width/height is equal one of the bitmaps.
Bitmap	largeBmp
	The bitmap representing the large image.
int16_t	moveAnimationEndX
	The move animation end x coordinate.
int16_t	moveAnimationEndY
	The move animation end y coordinate.
EasingEquation	moveAnimationXEquation
	The move animation x coordinate equation.
EasingEquation	moveAnimationYEquation
	The move animation y coordinate equation.
ScalableImage	scalableImage
	The scalable image for displaying the bitmap when the width/height is not equal one of the bitmaps.
Bitmap	smallBmp
	The bitmap representing the small image.
uint16_t	zoomAnimationDelay
	A delay that is applied before animation start. Expressed in ticks.
int16_t	zoomAnimationDeltaX
	The zoom animation delta x.
int16_t	zoomAnimationDeltaY
	The zoom animation delta y.
int16_t	zoomAnimationEndHeight
	Height of the zoom animation end.
int16_t	zoomAnimationEndWidth
	Width of the zoom animation end.
EasingEquation	zoomAnimationHeightEquation
	The zoom animation height equation.
int16_t	zoomAnimationStartHeight
	Height of the zoom animation start.
int16_t	zoomAnimationStartWidth
	Width of the zoom animation start.
int16_t	zoomAnimationStartX
	The zoom animation start x coordinate.
int16_t	zoomAnimationStartY
	The zoom animation start y coordinate.
EasingEquation	zoomAnimationWidthEquation
	The zoom animation width equation.

Additional inherited members

Public Functions inherited from Container

virtual void	add(Drawable & d)
	Adds a Drawable instance as child to this Container.
	Container()
virtual bool	contains(const Drawable & d)
	Query if a given Drawable has been added directly to this Container.
virtual void	draw(const Rect & invalidatedArea) const
	Draw this drawable.
virtual void	forEachChild(GenericCallback< Drawable & > * function)
	Executes the specified callback function for each child in the Container.
virtual Drawable *	getFirstChild()
	Obtain a pointer to the first child of this container.
virtual void	getLastChild(int16_t x, int16_t y, Drawable ** last)
	Gets the last child in the list of children in this Container.
virtual void	getLastChildNear(int16_t x, int16_t y, Drawable * last, int16_t fingerAdjustmentX, int16_t * fingerAdjustmentY)
	Works similar to getLastChild() but also considers the current set finger size in HAL.
virtual Rect	getSolidRect() const
	Get (the largest possible) rectangle that is guaranteed to be solid (opaque).
virtual void	insert(Drawable * previous, Drawable & d)
	Inserts a Drawable after a specific child node.
virtual void	remove(Drawable & d)
	Removes a Drawable from the container by removing it from the linked list of children.
virtual void	removeAll()
	Removes all children in the Container by resetting their parent and sibling pointers.
virtual void	unlink()
	Removes all children by unlinking the first child.

Protected Functions inherited from Container

virtual Rect	getContainedArea() const
	Gets a rectangle describing the total area covered by the children of this container.
virtual void	moveChildrenRelative(int16_t deltaX, int16_t deltaY)
	Calls moveRelative on all children.

Protected Attributes inherited from Container

Drawable *	firstChild
	Pointer to the first child of this container. Subsequent children can be found through firstChild's nextSibling.

Public Functions inherited from Drawable

void	center()
	Centers the Drawable inside its parent.
void	centerX()
	Center the Drawable horizontally inside its parent.
void	centerY()
	Center the Drawable vertically inside its parent.
virtual void	childGeometryChanged()
	This function can be called on parent nodes to signal that the size or position of one or more of its children has changed.
virtual void	draw(const Rect & invalidatedArea) const =0
	Draw this drawable.
	Drawable()
	Initializes a new instance of the Drawable class.
void	drawToDynamicBitmap(BitmapId id)
	Render the Drawable object into a dynamic bitmap.
void	expand(int margin =0)
	Expands the Drawable to have the same size as its parent with a given margin around the edge.
Rect	getAbsoluteRect() const
	Helper function for obtaining the rectangle this Drawable covers, expressed in absolute coordinates.
virtual Drawable *	getFirstChild()
	Function for obtaining the first child of this drawable if any.
int16_t	getHeight() const
	Gets the height of this Drawable.
virtual void	getLastChild(int16_t x, int16_t y, Drawable ** last) =0
	Function for obtaining the the last child of this drawable that intersects with the specified point.
Drawable *	getNextSibling()
	Gets the next sibling node.
Drawable *	getParent() const
	Returns the parent node.
const Rect &	getRect() const
	Gets the rectangle this Drawable covers, in coordinates relative to its parent.
virtual Rect	getSolidRect() const =0
	Get (the largest possible) rectangle that is guaranteed to be solid (opaque).
virtual Rect	getSolidRectAbsolute()
	Helper function for obtaining the largest solid rect (as implemented by getSolidRect()) expressed in absolute coordinates.
virtual void	getVisibleRect(Rect & rect) const
	Function for finding the visible part of this drawable.
int16_t	getWidth() const
	Gets the width of this Drawable.
int16_t	getX() const
	Gets the x coordinate of this Drawable, relative to its parent.
int16_t	getY() const
	Gets the y coordinate of this Drawable, relative to its parent.
virtual void	handleClickEvent(const ClickEvent & event)
	Defines the event handler interface for ClickEvents.
virtual void	handleDragEvent(const DragEvent & event)
	Defines the event handler interface for DragEvents.
virtual void	handleGestureEvent(const GestureEvent & event)
	Defines the event handler interface for GestureEvents.
virtual void	invalidate() const
	Tell the framework that this entire Drawable needs to be redrawn.
virtual void	invalidateRect(Rect & invalidatedArea) const
	Request that a region of this drawable is redrawn.
bool	isTouchable() const
	Gets whether this Drawable receives touch events or not.
bool	isVisible() const
	Gets whether this Drawable is visible.
virtual void	moveRelative(int16_t x, int16_t y)
	Moves the drawable.
virtual void	moveTo(int16_t x, int16_t y)
	Moves the drawable.
void	setPosition(const Drawable & drawable)
	Sets the position of the Drawable to the same as the given Drawable.
void	setPosition(int16_t x, int16_t y, int16_t width, int16_t height)
	Sets the size and position of this Drawable, relative to its parent.
void	setTouchable(bool touch)
	Controls whether this Drawable receives touch events or not.
void	setVisible(bool vis)
	Controls whether this Drawable should be visible.
void	setWidthHeight(const Bitmap & bitmap)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(const Drawable & drawable)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(const Rect & other)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
void	setWidthHeight(int16_t width, int16_t height)
	Sets the dimensions (width and height) of the Drawable without changing the x and y coordinates).
virtual void	setX(int16_t x)
	Sets the x coordinate of this Drawable, relative to its parent.
void	setXY(const Drawable & drawable)
	Sets the x and y coordinates of this Drawable.
void	setXY(int16_t x, int16_t y)
	Sets the x and y coordinates of this Drawable, relative to its parent.
virtual void	setY(int16_t y)
	Sets the y coordinate of this Drawable, relative to its parent.
virtual void	translateRectToAbsolute(Rect & r) const
	Helper function for converting a region of this Drawable to absolute coordinates.
virtual	~Drawable()
	Finalizes an instance of the Drawable class.

Protected Attributes inherited from Drawable

Drawable *	nextSibling
	Pointer to the next Drawable.
Drawable *	parent
	Pointer to this drawable's parent.
Rect	rect
	The coordinates of this Drawable, relative to its parent.
bool	touchable
	True if this drawable should receive touch events.
bool	visible
	True if this drawable should be drawn.

Public Types Documentation

ZoomMode

enum ZoomMode

A ZoomMode describes in which direction the image will grow/shrink when do a zoom animation.

FIXED_CENTER	The small image will grow from the center of the large image.
FIXED_LEFT	The small image will grow from the middle of the left side of the large image.
FIXED_RIGHT	The small image will grow from the middle of the right side of the large image.
FIXED_TOP	The small image will grow from the middle of the top of the large image.
FIXED_BOTTOM	The small image will grow from the middle of the bottom of the large image.
FIXED_LEFT_AND_TOP	The small image will grow from the top left corner of the large image.
FIXED_RIGHT_AND_TOP	The small image will grow from the top right corner of the large image.
FIXED_LEFT_AND_BOTTOM	The small image will grow from the bottom left corner of the large image.
FIXED_RIGHT_AND_BOTTOM	The small image will grow from the bottom right corner of the large image.

Protected Types Documentation

States

enum States

Animation states.

ANIMATE_ZOOM	Zoom animation state.
ANIMATE_ZOOM_AND_MOVE	Zoom and move animation state.
NO_ANIMATION	No animation state.

Public Functions Documentation

cancelZoomAnimation

void cancelZoomAnimation	(			)

Cancel zoom animation.

The image is left in the position and size it is currently at.

getAlpha

virtual uint8_t getAlpha	(			)	const

Gets the current alpha value of the widget.

The alpha value is in range 255 (solid) to 0 (invisible).

Returns:

The current alpha value.

See also:

setAlpha

getAnimationDelay

virtual uint16_t getAnimationDelay	(			)	const

Gets the current animation delay.

Returns:

The current animation delay. Expressed in ticks.

See also:

setAnimationDelay

getLargeBitmap

Bitmap getLargeBitmap	(			)	const

Gets the large bitmap.

Returns:

the large bitmap.

See also:

setBitmaps

getScalingMode

virtual ScalableImage::ScalingAlgorithm getScalingMode	(			)

Gets the scaling algorithm of the ScalableImage.

Returns:

the scaling algorithm used.

See also:

setScalingMode

getSmallBitmap

Bitmap getSmallBitmap	(			)	const

Gets the small bitmap.

Returns:

the small bitmap.

See also:

setBitmaps

handleTickEvent

virtual void handleTickEvent	(			)

Called periodically by the framework if the Drawable instance has subscribed to timer ticks.

See also:

Application::registerTimerWidget

Reimplements: touchgfx::Drawable::handleTickEvent

invalidateContent

virtual void invalidateContent	(			)	const

Tell the framework that the contents of the Drawable needs to be redrawn.

If the Drawable is invisible, nothing happens. Subclasses of Drawable are encouraged to implement this function and invalidate as little as possible, i.e. the smallest rectangle covering the visual element(s) drawn by the widget.

Reimplements: touchgfx::Drawable::invalidateContent

isZoomAnimationRunning

bool isZoomAnimationRunning	(			)	const

Is there currently an animation running.

Returns:

true if there is an animation running.

setAlpha

virtual void setAlpha	(	uint8_t	newAlpha	)

Sets the opacity (alpha value).

This can be used to fade it away by gradually decreasing the alpha value from 255 (solid) to 0 (invisible).

Parameters:

newAlpha	The new alpha value. 255=solid, 0=invisible.

Note

The user code must call invalidate() in order to update the display.

See also:

getAlpha

setAnimationDelay

virtual void setAnimationDelay	(	uint16_t	delay	)

Sets a delay on animations done by the ZoomAnimationImage.

Defaults to 0 which means that the animation starts immediately.

Parameters:

delay	The delay in ticks.

See also:

getAnimationDelay

setAnimationEndedCallback

void setAnimationEndedCallback	(	GenericCallback< const ZoomAnimationImage & > &	callback	)

Associates an action to be performed when the animation ends.

Parameters:

callback	The callback to be executed. The callback will be given a reference to the ZoomAnimationImage.

See also:

GenericCallback

setBitmaps

void setBitmaps	(	const Bitmap &	smallBitmap ,
		const Bitmap &	largeBitmap
		)

Initializes the bitmap of the image to be used.

The bitmaps should represent the same image in the two needed static resolutions.

Parameters:

smallBitmap	The image in the smallest resolution.
largeBitmap	The image in the largest resolution.

Note

The size of the bitmaps do not in any way limit the size of the ZoomAnimationImage and it is possible to scale the image beyond the sizes of these bitmaps.

See also:

getSmallBitmap, getLargeBitmap

setHeight

virtual void setHeight	(	int16_t	height	)

Sets the height of this drawable.

Parameters:

height	The new height.

Note

For most Drawable widgets, changing this does normally not automatically yield a redraw.ZoomAnimationImage diverts from the normal behavior by automatically invalidating which causes a redraw.

Reimplements: touchgfx::Drawable::setHeight

setScalingMode

virtual void setScalingMode	(	ScalableImage::ScalingAlgorithm	mode	)

Sets the algorithm to be used.

In short, there is currently a value for fast (nearest neighbor) and a value for slow (bilinear interpolation). Default is ScalableImage::NEAREST_NEIGHBOR since moving images do not need to be of the best quality, until they stop moving. If the image moves only a little bit, or moves/resizes slowly, consider using ScaleableImage::BILINEAR_INTERPOLATION.

Parameters:

mode	The algorithm to use when rendering.

See also:

ScalableImage::ScalingAlgorithm, getScalingMode

setWidth

virtual void setWidth	(	int16_t	width	)

Sets the width of this drawable.

Parameters:

width	The new width.

Note

For most Drawable widgets, changing this does normally not automatically yield a redraw.ZoomAnimationImage diverts from the normal behavior by automatically invalidating which causes a redraw.

Reimplements: touchgfx::Drawable::setWidth

startZoomAndMoveAnimation

void startZoomAndMoveAnimation	(	int16_t	endX ,
		int16_t	endY ,
		int16_t	endWidth ,
		int16_t	endHeight ,
		uint16_t	duration ,
		ZoomMode	zoomMode =FIXED_LEFT_AND_TOP,
		EasingEquation	xProgressionEquation =&EasingEquations::linearEaseNone,
		EasingEquation	yProgressionEquation =&EasingEquations::linearEaseNone,
		EasingEquation	widthProgressionEquation =&EasingEquations::linearEaseNone,
		EasingEquation	heightProgressionEquation =&EasingEquations::linearEaseNone
		)

Setup and starts the zoom and move animation.

At end of the animation the image will have been resized to the endWidth and endHeight and have moved from its original position to the endX and endY. Please note that the ZoomMode might influence the actual end position since the zoom transformation might change the X and Y of the image. The ZoomMode FIXED_LEFT_AND_TOP ensures that the endX and endY will be the actual end position.

The development of the width, height, X and Y during the animation is described by the supplied EasingEquations. The container is registered as a TimerWidget and automatically unregistered when the animation has finished.

Parameters:

endX	The X position of the image at animation end. Relative to the container or view that holds the ZoomAnimationImage.
endY	The Y position of the image at animation end. Relative to the container or view that holds the ZoomAnimationImage.
endWidth	The width of the image at animation end.
endHeight	The height of the image at animation end.
duration	The duration of the animation measured in ticks.
zoomMode	(Optional) The zoom mode that will be used during the animation. Default is FIXED_LEFT_AND_TOP.
xProgressionEquation	(Optional) The equation that describes the development of the X position during the animation. Default is EasingEquations::linearEaseNone.
yProgressionEquation	(Optional) The equation that describes the development of the Y position during the animation. Default is EasingEquations::linearEaseNone.
widthProgressionEquation	(Optional) The equation that describes the development of the width during the animation. Default is EasingEquations::linearEaseNone.
heightProgressionEquation	(Optional) The equation that describes the development of the height during the animation. Default is EasingEquations::linearEaseNone.

startZoomAnimation

void startZoomAnimation	(	int16_t	endWidth ,
		int16_t	endHeight ,
		uint16_t	duration ,
		ZoomMode	zoomMode =FIXED_LEFT_AND_TOP,
		EasingEquation	widthProgressionEquation =&EasingEquations::linearEaseNone,
		EasingEquation	heightProgressionEquation =&EasingEquations::linearEaseNone
		)

Setup and starts the zoom animation.

At end of the animation the image will have been resized to the endWidth and endHeight. The development of the width and height during the animation is described by the supplied EasingEquations. The container is registered as a TimerWidget and automatically unregistered when the animation has finished.

Parameters:

endWidth	The width of the image at animation end.
endHeight	The height of the image at animation end.
duration	The duration of the animation measured in ticks.
zoomMode	(Optional) The zoom mode that will be used during the animation. Default is FIXED_LEFT_AND_TOP.
widthProgressionEquation	(Optional) The equation that describes the development of the width during the animation. Default is EasingEquations::linearEaseNone.
heightProgressionEquation	(Optional) The equation that describes the development of the height during the animation. Default is EasingEquations::linearEaseNone.

Note

The animation follows the specified ZoomMode so the X and Y coordinates of the image might change during animation.

ZoomAnimationImage

ZoomAnimationImage	(			)

Protected Functions Documentation

setCurrentState

virtual void setCurrentState	(	States	state	)

Sets the current animation state and reset the animation counter.

Parameters:

state	The new state.

startTimerAndSetParameters

void startTimerAndSetParameters	(	int16_t	endWidth ,
		int16_t	endHeight ,
		uint16_t	duration ,
		ZoomMode	zoomMode ,
		EasingEquation	widthProgressionEquation ,
		EasingEquation	heightProgressionEquation
		)

Starts timer and set parameters.

Contains code shared between startZoomAnimation() and startZoomAndMoveAnimation(). If both delay and duration is zero, the end position and size is applied and the animation is ended immediately.

Parameters:

endWidth	The end width.
endHeight	The end height.
duration	The duration.
zoomMode	The zoom mode.
widthProgressionEquation	The width progression equation.
heightProgressionEquation	The height progression equation.

updateRenderingMethod

virtual void updateRenderingMethod	(			)

Chooses the optimal rendering of the image given the current width and height.

If the dimensions match either the small or large bitmap, that will be used, otherwise the large image will be scaled using the defined scaling mode.

See also:

setScalingMode, setBitmaps

updateZoomAnimationDeltaXY

virtual void updateZoomAnimationDeltaXY	(			)

Calculates the change in X and Y caused by the zoom animation given the current ZoomMode.

Protected Attributes Documentation

animationCounter

uint16_t animationCounter

The progress counter for the animation.

animationDuration

uint16_t animationDuration

Duration of the animation.

animationEndedAction

GenericCallback< const ZoomAnimationImage & > * animationEndedAction

The animation ended action.

currentState

States currentState

The current animation state.

currentZoomMode

ZoomMode currentZoomMode

The ZoomMode to use by the animation.

image

Image image

The image for displaying the bitmap when the width/height is equal one of the bitmaps.

largeBmp

Bitmap largeBmp

The bitmap representing the large image.

moveAnimationEndX

int16_t moveAnimationEndX

The move animation end x coordinate.

moveAnimationEndY

int16_t moveAnimationEndY

The move animation end y coordinate.

moveAnimationXEquation

EasingEquation moveAnimationXEquation

The move animation x coordinate equation.

moveAnimationYEquation

EasingEquation moveAnimationYEquation

The move animation y coordinate equation.

scalableImage

ScalableImage scalableImage

The scalable image for displaying the bitmap when the width/height is not equal one of the bitmaps.

smallBmp

Bitmap smallBmp

The bitmap representing the small image.

zoomAnimationDelay

uint16_t zoomAnimationDelay

A delay that is applied before animation start. Expressed in ticks.

zoomAnimationDeltaX

int16_t zoomAnimationDeltaX

The zoom animation delta x.

zoomAnimationDeltaY

int16_t zoomAnimationDeltaY

The zoom animation delta y.

zoomAnimationEndHeight

int16_t zoomAnimationEndHeight

Height of the zoom animation end.

zoomAnimationEndWidth

int16_t zoomAnimationEndWidth

Width of the zoom animation end.

zoomAnimationHeightEquation

EasingEquation zoomAnimationHeightEquation

The zoom animation height equation.

zoomAnimationStartHeight

int16_t zoomAnimationStartHeight

Height of the zoom animation start.

zoomAnimationStartWidth

int16_t zoomAnimationStartWidth

Width of the zoom animation start.

zoomAnimationStartX

int16_t zoomAnimationStartX

The zoom animation start x coordinate.

zoomAnimationStartY

int16_t zoomAnimationStartY

The zoom animation start y coordinate.

zoomAnimationWidthEquation

EasingEquation zoomAnimationWidthEquation

The zoom animation width equation.